Lorex Technology DGN209 Manual do Utilizador

Copyright © 2006 LOREX Technology Inc. 9 CHANNEL MULTIPLEX DIGITAL VIDEO RECORDER Instructio

10 Back Panel Connections 1. POWER INPUT Connects to the Power cord. 2. EXTERNAL I/O Connects to a PC for Remote Control via RS-2

11 Accessing the Main Menu The Menu allows you to configure your DVR settings and program various recording options. Follow these steps in order to

12 ► M 2002-JAN-01 01:02:03 M-HDD M 2002-JAN-01 01:02:03 M-HDD A 2002-JAN-01 01:02:03 M-HDD T 2002-JAN-01 01:02:03 M-HDD D 2002-JAN-01 01:02:03 S

13Timer Recording Setup On the Main Menu, selecting the Timer option will allow you to set daily schedules in which you would like the DVR to automa

14Record Settings On the Main menu, selecting the Record option will allow you to set the quality and speed of recordings. Pressing ENTER after sc

15Motion Trigger Record 1. Press ENTER to confirm MOTION TRIGGER RECORD setup. 2. Press▲ / ▼ to toggle the option between ON and OFF. 1. Select “ON”

16Record Method This feature is used to select the DVR record method as either EVENT / NORMAL / OFF. 1. Press ▲ / ▼ to select the desired time came

17Motion Detection The Motion Detect feature provides a visual indication on the monitor when movement is detected in the picture. Also, if the ‘Moti

18Figure 1-1 MOTION DETECTION SETUP – 1~9 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 032

19System Setup The System menu is used to configure the system level options on the DXR209. To access the System features, press MENU followed by t

2 Under the copyright laws, this documentation may not be copied, photocopied, reproduced, translated, or reduced to any electronic me

204. Press ▲ / ▼ to move to another field on the System screen or press MENU to exit. Setting the Motion Audible Alarm feature If enabled, the buzze

21D-M-Y = Day - Month - Year Off = The date and time will not show on the screen. 3. Press MENU to confirm your change. 4. Press ▲ / ▼ to move to ano

22 (Menu) Search Timer Record Camera System ► Event Network (Menu) Search

23 HDD Status – This will display either the remaining HDD capacity in GB or OW to indicate that it is set to Overwrite. Video Loss - Screen will d

24Video Search The DVR allows you to easily find sections of recorded video using the Search feature. Press the SEARCH button and you will see the

25Hardware Connection from DVR

263. Choose the destination location and press “Next”.

27 6. After the installation, the following files listed below will appear in your assigned path or file folder. There will be 6 files and 1 fol

28 Dynamic IP Setting WHAT IS A DYNAMIC IP ADDRESS? A Dynamic IP Address is an IP (Internet Protocol) address that changes e

29 4. After registering your account, you will receive an e-mail, which contains instructions to activate your account. If you do not fol

3Table of Contents Important Safety Instructions...

30 2. Network setting for PC. (The instruction is based on Win XP O/S. If your O/S is Win 2000 or Win 2003, the setup procedure is simi

315. Choose “Obtain an IP address automatically”.

32

333. In the “ADVANCED SETUP / Virtual Server”. Choose “By Port” and set the “Port Number” to 80 for the Video Web Server. Set the “Local Serve

34STEP 7 : Connect to the DVR via the Internet 1. Change PC network setting to the original setting and link PC to the internet. 2. Click

35Software Operation at the Remote Site Follow the steps below to connect to a remote site. (e.g. If you set up the server at your office with on

36Control Panel and Basic Operation A. Video Web Server control panel

37B. Digital device control panel

38Advanced Settings Click on “System Config” for advanced setting.

39MAIL

4Appendix 1: Installing the HDD ...

40TOOL BOX

41Step 2: Enter your Username and Password to login to the Video Web Server.

42 Step 4: After you login, you will see the Video Web Server screen (example below).

43Troubleshooting Check that the HDD has been installed correctly. No recorded video Check camera’s video cables and connections. Check monitor’s

44 Technical Specifications Video format NTSC/EIA or PAL/CCIR Network Interface Ethernet (10100 Base-T) Protocols TCPIP, ICMP, SMTP, HTTP, FTP T

45 Appendix 1: Installing the HDD NOTE: The HDD has the same purpose in a DXR209 as a videocassette does in a VCR. However, installing the HDD is

46B (unlocked) A (locked) Step 6: Secure the HDD in the Cartridge Casing. Position the HDD into place and secure it using the six screws supp

47 Appendix 2: Connection Diagram to Cameras and Monitor EXTERNAL I/OPOWER75Ω 2CALLLOOPINPUTRISK OF ELECTRIC SHOCK DO NOT OPENWARNING :

48 Appendix 3: Pin Configurations 25 Pin Com Port EXTERNAL ALAM NO EXTERNAL ALARM COM

49Appendix 4: Rack Mount Installation Screws and brackets for rack mounting applications can be purchased as an optional accessory. Front Angle wi

5 Important Safety Instructions All the safety and operating instructions should be read before operating this equipment. The improper operation may

50 Appendix 5: Recording Times (in Hours) NTSC SYSTEM IPS 25A 15 8 4 2 1 Best 16hr 32hr 60hr 120hr 240hr 480hr High 20hr 40hr 75hr 150hr 3

51 Appendix 6: Compatible HDD Brands Manufacturer Model CapacityRotationHITACHI Deskstar 180 GXP (120 GB) 120GB 7200 rpmHITACHI Deskstar 7K250, HDS

52It’s all on the web  Product Information  User Manuals  Quick Start Guides  Specification Sh

6Introduction The DXR209 combines a 9 channel multiplexer with a Digital Video Recorder (DVR). The DVR offers many advantages over traditional time

7 System Contents The DXR209 box should include the items listed below. Please take a moment to verify that no items are missing from the package.

8 Front Panel Controls 1. REMOVABLE HDD CARTRIDGE Please refer to Appendix #1. 2. LED INDICATORS These LED Lights are ON

9UP: When in the setup mode, it works as an Up directional button. 15. PLAY Press PLAY to playback the most recently recorded video. 16.